BURNERS IGNITERS   FLAME DETECTORS

FORNEY 火焰检测设备  

E-mail:njxj888@163.com

产品中心

    

     

PRODUCT DISPLAY

新闻中心

当前位置：

Forney 福尼 IDD 9000火焰放大器 Flame Amplifier

Forney 福尼 IDD 9000火焰放大器 Flame Amplifier

Forney 福尼  火焰探测器 HD FLAME DETECTOR


0.00
0.00
  
商品描述

Forney 福尼  火焰探测器 HD FLAME DETECTOR



Forney 福尼 IDD 9000火焰放大器 Flame Amplifier

IDD 9000火焰放大器是为方便升级现有的Forney火焰放大器而设计的，大多数安装只需更换火焰放大器并重新连接现有电线即可提高火焰检测和识别能力。IDD 9000有面板安装或机架安装两种形式；单通道或双通道配置。双通道配置使用两个完全独立的通道同时支持两个火焰探测器

The IDD 9000 Flame Amplifier is designed for easy upgrade of existing Forney flame amplifiers with most installations simply requiring a flame amplifier replacement and reconnection of existing wires to improve flame detection and discrimination. The IDD 9000 is available in panel or rack mount; single or dual channel configurations. The dual channel configurations use two fully independent channels to support two flame detectors simultaneously

Compatible Flame Detectors:

  • IDD-II, Filtered, Infrared Detector Part #38321-21

  • IDD-IIU, Unfiltered, Infrared Detector Part #38321-22

  • IDD-IIL, Infrared Detector for Lignite Part #38321-23

  • UV-4, UV Tube Detector Part #379189-02 

IDD 9000 Specifications:


Panel Mount:Rack Mount:
Dimensions:10 1/2” x 7 7/8” x 3 7/8” (26.6 cm x 20 cm x 9.8 cm)6.5 x 14 x 1.75 inches (155.6 x 355.6 x 44.5 mm)
Weight:5 lbs. 3 oz.1 lb 7 oz.
Temperature:32° to 140°F (0° to 60°C)
Humidity:5% to 95% relative humidity, non-condensing
Power Requirements:120/240 VAC, 50/60 Hz @ 12 VA
Output Relay Ratings (SPDT):3 A at 125 VAC, 250 VAC & 30 VDC
3 relays are available for each channel (Lamp, Main Flame & Alarm).
Flame Strength:4-20 mA or 0-10 VDC (sourcing)
Flame Failure Response Time (FFRT):2.0, 3.0 or 3.8 seconds
Flame Pickup Time:less than 2 seconds
Nonvolatile RAM:8 complete operating profiles
Approvals:Factory Mutual (FM)